Click image to view full size image
Technical Information:
Choose from our range of FDDI (MIC) Fiber optic cables. All our cables are made here in Australia and guaranteed to perform. All Fiber cable assemblies manufactured comply to EIA/TIA standards.
Application:
► CATV & CCTV;
► Fiber Optic Telecommunications;
► LAN (Local Area Network);
► FTTH (Fiber To the Home);
► High speed transmission Systems.
Features:
► Low Insertion Loss;
► Good Repeatability;
► Good Changeability;
► Good Temperature Stabilization.
Technical Polarity:
Specifications of Connector:
|
Fiber count |
Single-mode |
Multimode |
|
G.652 |
62.5µm |
50µm |
|
1310/1550 nm |
850/1300 nm |
850/1300 nm |
|
Insertions Loss |
c 0.3 dB |
c 0.5 dB |
|
Return Loss |
c 45 dB (PC) Typical |
c 65 dB (APC) Typical |
|
Operating Temperature Range |
-30℃ ~ 75℃ | -22˚ F ~167˚F |
||
Storage Temperature Range |
-40℃ ~ 85℃ | -40˚F ~185˚F |
||
Optical Properties:
| Items | Unit |
Specification |
||
Cladding Non-Circularity |
% |
≤2.0 |
||
Coating Diameter |
μm |
245±10 |
||
Cladding-Coating Concentricity Error |
μm |
≤1.0 |
||
Core Diameter |
μm |
62.5±2.5 |
||
Cladding Diameter |
μm |
125±1.0 |
||
Cable Material | ||||
Outer sheath |
LSZH (Pink) |
|||
Outer sheath of single fiber |
LSZH (Pink) |
|||
Secondary sheath of single fiber |
Nylon TIGHT |
|||
Strength member |
Aramid yarns |
|||
Fiber Type |
MM‐62.5/125µm |
|||
Connector Type |
FDDI - FDDI |
|||
Certification and Compliance:
| RoHS | Directive on Restriction of Hazardous Substances |
GR-326-CORE |
Generic Requirements for Single-mode Optical Connectors and Jumper Assemblies. Optical Fiber Cabling |
TIA/EIA-568-C.3 |
Components Standards |
EIA/TIA-604 |
Fiber Optic Connector Intermateability Standard |
UL 94 |
Our Third Party Tests for Flammability of Plastic Materials for Parts in Devices and appliances |
E-mail: 